GPD je objavio popravak koji rješava problem u kojem eGPU priključne stanice, kao što je GPD G1, nisu ispravno funkcionirale putem USB 4 ili OCuLinka. Ovaj se popravak odnosi isključivo na uređaje s AMD Ryzen 9 HX 365 i HX 370 procesorima. Nije namijenjen uređajima s AMD Ryzen 8840U ili starijim procesorima, jer ovi modeli nemaju ovaj problem. Ne preporučuje se korištenje ovog popravka na starijim modelima.
Za ponovnu potvrdu, treba ga koristiti samo na sljedećim modelima. Ako niste sigurni koji model imate i koji ste kupili od nas, obratite nam se za potvrdu.
GPD POBJEDA 4 2025 Samo AMD Ryzen 9 HX
GPD POBJEDA MAX 2 2025 Samo AMD Ryzen 9 HX
GPD WIN Mini 2025 samo AMD Ryzen 9 HX
GPD Pocket 4 Samo AMD Ryzen 9 HX
GPD Duo Samo AMD Ryzen 9 HX
Prvo preuzmite datoteku graphics_patch.rar odavde (sigurnosna veza ovdje). Budući da se radi o softveru na razini jezgre sustava Windows, preglednik ili antivirusni program mogu vas blokirati ili upozoriti tijekom preuzimanja. Imajte na umu da su ove datoteke sigurne, a upozorenja lažno pozitivna. Nakon preuzimanja izdvojite datoteke na svoj GPD uređaj.
Sada pokrenite datoteku AGC-Setup-1.0.6.exe . Ako se od vas zatraži Microsoft Defender SmartScreen, odaberite Pokreni svejedno da biste nastavili.
Slijedite upute za instalaciju softvera. Kada se od vas zatraži da ponovno pokrenete računalo, odaberite opciju za ponovno pokretanje, a zatim kliknite Završi za ponovno pokretanje uređaja.
Nakon ponovnog pokretanja sustava Windows, na radnoj površini pronaći ćete ikonu AGC prečaca. Dvaput kliknite na njega da biste pokrenuli softver i vidjet ćete glavni zaslon. Idite na karticu Config GPU Feature .
Kliknite gumb Zamijeni upravljački program Kmd da biste otvorili dijaloški okvir za odabir datoteke.
Dođite do izdvojenih datoteka i odaberite datoteku amdkmdag.sys .
Nakon što je datoteka uvezena i ažurirana, pojavit će se okvir s obavijestima koji potvrđuje ažuriranje i traži da ponovno pokrenete uređaj. Ažuriranje možete provjeriti pregledom tekstualnog zapisnika prikazanog u okviru. Kliknite U redu u okviru obavijesti, a zatim odaberite Ponovno pokreni OS ili ponovno pokrenite uređaj s izbornika Start.
Nakon ponovnog pokretanja možete nastaviti koristiti svoj uređaj kao i obično. Ako još niste postavili svoj GPD G1, ovdje možete pronaći naš jednostavan vodič Početak rada s GPD G1.
I have the drivers of 25.3.1 and am not getting any crashes. But when I run a game, I get 20fps and only 16% GPU utilization no matter what settings I pick. If i run a benchmark I get full performance of the GPU and the expected FPS. I am using OcuLink with a 7800XT GPU.
I have tested the same GPU on a thunderbolt dock and got the expect results, it seems to only be affecting my oculink port.
Can you first check the refresh rate of the screen in Windows Display Settings, and also in the AMD settings and going by your other message on Steam Settings. It sounds like you may have a frame limiter enabled somewhere if all games are doing it.
Have you tried a fresh install of the latest drivers? Follow our guide at https://gpdstore.net/kb/software-guides/kb-article/how-to-uninstall-and-install-amd-graphics-drivers/ for how to fully remove the drivers and reinstall them.
If you are still having issues. Which eGPU and OCuLink cable do you have? The OCuLink cable especially can have issues if not fully compatible with certain eGPUs. The one we sell has been tested with the GPD G1 and ONEXGPU series eGPUs.
I have tested with Oculink and still not getting proper speeds with the 25.3.1 AMD drivers. I get perfect scores in benchmarks, but Steam games refuse to use the GPU above 15% utilization.
I replied to your other message.
Hi, Thank you for continuing to improve.
But unfortunately, OCulink still crashes on GPD Win4 (2025/HX) with G1(2024).
The error no longer occurred immediately, but when I ran benchmark (FF XV) software, AMD generated an error and stopped recognizing G1.
When connected via USB4, the G1 works without problems regardless of whether or not this patch is applied.
Thank you for the feedback. We have passed this on to GPD engineers to look into further. We will update this page with any further information and fixes. Thanks.
Same issue with oculink I would hold of from purchasing until this is fixed
GPD are still working on a proper fix for this. We will update when it is available. Thanks.
The new AMD drivers 25.3.1 fixes the issue with eGPUs. We ran a few different game benchmarks multiple times and had no issues at all.
FYI: with my GPD G1 and GPD Duo HX 370
We replied to your other comment to say we have passed this on to GPD engineers to look into further. Thanks.
Hi, followed the instructions and still it still crashes both through USB and Oculink.
Thank you for the feedback, we have passed this on to GPD engineers to look into further.