หากคุณประสบปัญหากับอุปกรณ์ GPD WIN 4 2025, GPD WIN MAX 2 2025, GPD WIN MINI 2025, GPD Pocket 4 หรือ GPD Duo เมื่อใช้กับ eGPU เช่น GPD G1 ไดรเวอร์ AMD Adrenalin ล่าสุดจะแก้ไขปัญหา
หากไดรเวอร์ AMD ของคุณเก่ากว่า 25.3.1 การอัปเดตเป็นไดรเวอร์ล่าสุดจะช่วยแก้ปัญหาความน่าเชื่อถือของอุปกรณ์ HX 365 และ HX 370 ของ GPD
กําลังโหลดซอฟต์แวร์ AMD Adrenalin #
เพื่อตรวจสอบว่าไดรเวอร์ของคุณเป็นเวอร์ชันล่าสุดหรือไม่ คุณสามารถตรวจสอบบนทาสก์บาร์สําหรับแอป AMD Adrenalin
หากไอคอนไม่แสดงที่นั่น พิมพ์ “AMD” ลงในการค้นหาแถบงานและจะปรากฏในผลลัพธ์
หากซอฟต์แวร์ไม่แสดงที่นี่คุณอาจไม่ได้ติดตั้งซอฟต์แวร์ AMD Adrenalin โปรดดูคําแนะนําของเราเกี่ยวกับวิธี การติดตั้งไดรเวอร์ AMD ที่นี่ การดําเนินการนี้จะติดตั้งไดรเวอร์ล่าสุดโดยอัตโนมัติซึ่งเป็นส่วนหนึ่งของกระบวนการ และคุณจะพร้อมที่จะใช้อุปกรณ์ของคุณกับ eGPU
การตรวจสอบและติดตั้งการอัปเดตโปรแกรมควบคุม #
เมื่อโหลดซอฟต์แวร์ AMD Adrenaline แล้ว พื้นที่บนขวาจะแสดงเวอร์ชันไดรเวอร์ปัจจุบันของคุณและปุ่มเพื่อ ตรวจสอบการอัปเดตคลิกที่สิ่งนี้
หลังจากนั้นสักครู่ คุณจะได้รับ แจ้งให้ดาวน์โหลดการอัปเดต ให้เลือกตัวเลือกนี้
เมื่อการดาวน์โหลดเสร็จสิ้น คุณจะเห็นตัวเลือก การติดตั้ง เลือกตัวเลือกนี้และทําตามคําแนะนําเพื่ออัปเดตไดรเวอร์ เมื่ออัปเดตแล้ว ให้รีสตาร์ทอุปกรณ์ของคุณและจะพร้อมใช้งานกับ eGPU ของคุณ
หากคุณยังไม่ได้ตั้งค่า eGPU เช่น GPD G1 โปรดทําตามคําแนะนําของเราที่นี่
I have the drivers of 25.3.1 and am not getting any crashes. But when I run a game, I get 20fps and only 16% GPU utilization no matter what settings I pick. If i run a benchmark I get full performance of the GPU and the expected FPS. I am using OcuLink with a 7800XT GPU.
I have tested the same GPU on a thunderbolt dock and got the expect results, it seems to only be affecting my oculink port.
Can you first check the refresh rate of the screen in Windows Display Settings, and also in the AMD settings and going by your other message on Steam Settings. It sounds like you may have a frame limiter enabled somewhere if all games are doing it.
Have you tried a fresh install of the latest drivers? Follow our guide at https://gpdstore.net/kb/software-guides/kb-article/how-to-uninstall-and-install-amd-graphics-drivers/ for how to fully remove the drivers and reinstall them.
If you are still having issues. Which eGPU and OCuLink cable do you have? The OCuLink cable especially can have issues if not fully compatible with certain eGPUs. The one we sell has been tested with the GPD G1 and ONEXGPU series eGPUs.
I have tested with Oculink and still not getting proper speeds with the 25.3.1 AMD drivers. I get perfect scores in benchmarks, but Steam games refuse to use the GPU above 15% utilization.
I replied to your other message.
Hi, Thank you for continuing to improve.
But unfortunately, OCulink still crashes on GPD Win4 (2025/HX) with G1(2024).
The error no longer occurred immediately, but when I ran benchmark (FF XV) software, AMD generated an error and stopped recognizing G1.
When connected via USB4, the G1 works without problems regardless of whether or not this patch is applied.
Thank you for the feedback. We have passed this on to GPD engineers to look into further. We will update this page with any further information and fixes. Thanks.
Same issue with oculink I would hold of from purchasing until this is fixed
GPD are still working on a proper fix for this. We will update when it is available. Thanks.
The new AMD drivers 25.3.1 fixes the issue with eGPUs. We ran a few different game benchmarks multiple times and had no issues at all.
FYI: with my GPD G1 and GPD Duo HX 370
We replied to your other comment to say we have passed this on to GPD engineers to look into further. Thanks.
Hi, followed the instructions and still it still crashes both through USB and Oculink.
Thank you for the feedback, we have passed this on to GPD engineers to look into further.