Jika anda mengalami masalah dengan peranti GPD WIN 4 2025, GPD WIN MAX 2 2025, GPD WIN MINI 2025, GPD Pocket 4 atau GPD Duo anda apabila digunakan dengan eGPU seperti GPD G1, pemacu AMD Adrenalin terkini akan menyelesaikan isu tersebut.
Jika pemacu AMD anda lebih awal daripada 25.3.1, maka mengemas kini kepada pemacu terkini akan menyelesaikan isu kebolehpercayaan dengan peranti HX 365 dan HX 370 GPD.
Memuatkan perisian AMD Adrenalin #
Untuk menyemak sama ada pemandu anda dikemas kini. Anda boleh menyemak pada bar tugas untuk apl AMD Adrenalin.
Jika ikon tidak dipaparkan di sana. Taip “AMD” ke dalam carian bar tugas dan ia akan muncul dalam hasil.
Jika perisian tidak dipaparkan di sini sama ada, maka anda mungkin tidak memasang perisian AMD Adrenalin. Sila rujuk panduan kami tentang cara memasang pemacu AMD di sini. Ini akan memasang pemacu terkini secara automatik sebagai sebahagian daripada proses dan anda akan bersedia untuk menggunakan peranti anda dengan eGPU.
Menyemak dan memasang kemas kini pemacu #
Sebaik sahaja perisian AMD Adrenaline telah dimuatkan. Kawasan kanan atas akan menunjukkan versi pemacu semasa anda dan butang untuk Semak Kemas Kini, klik pada ini.
Selepas beberapa saat anda akan digesa untuk Muat turun kemas kini, pilih pilihan ini.
Setelah muat turun selesai, anda akan dibentangkan dengan pilihan Pasang, pilih ini dan ikut gesaan untuk mengemas kini pemacu. Setelah dikemas kini, mulakan semula peranti anda dan ia akan sedia untuk digunakan dengan eGPU anda.
Jika anda belum menyediakan eGPU anda seperti GPD G1, sila ikuti panduan kami di sini.
I have the drivers of 25.3.1 and am not getting any crashes. But when I run a game, I get 20fps and only 16% GPU utilization no matter what settings I pick. If i run a benchmark I get full performance of the GPU and the expected FPS. I am using OcuLink with a 7800XT GPU.
I have tested the same GPU on a thunderbolt dock and got the expect results, it seems to only be affecting my oculink port.
Can you first check the refresh rate of the screen in Windows Display Settings, and also in the AMD settings and going by your other message on Steam Settings. It sounds like you may have a frame limiter enabled somewhere if all games are doing it.
Have you tried a fresh install of the latest drivers? Follow our guide at https://gpdstore.net/kb/software-guides/kb-article/how-to-uninstall-and-install-amd-graphics-drivers/ for how to fully remove the drivers and reinstall them.
If you are still having issues. Which eGPU and OCuLink cable do you have? The OCuLink cable especially can have issues if not fully compatible with certain eGPUs. The one we sell has been tested with the GPD G1 and ONEXGPU series eGPUs.
I have tested with Oculink and still not getting proper speeds with the 25.3.1 AMD drivers. I get perfect scores in benchmarks, but Steam games refuse to use the GPU above 15% utilization.
I replied to your other message.
Hi, Thank you for continuing to improve.
But unfortunately, OCulink still crashes on GPD Win4 (2025/HX) with G1(2024).
The error no longer occurred immediately, but when I ran benchmark (FF XV) software, AMD generated an error and stopped recognizing G1.
When connected via USB4, the G1 works without problems regardless of whether or not this patch is applied.
Thank you for the feedback. We have passed this on to GPD engineers to look into further. We will update this page with any further information and fixes. Thanks.
Same issue with oculink I would hold of from purchasing until this is fixed
GPD are still working on a proper fix for this. We will update when it is available. Thanks.
The new AMD drivers 25.3.1 fixes the issue with eGPUs. We ran a few different game benchmarks multiple times and had no issues at all.
FYI: with my GPD G1 and GPD Duo HX 370
We replied to your other comment to say we have passed this on to GPD engineers to look into further. Thanks.
Hi, followed the instructions and still it still crashes both through USB and Oculink.
Thank you for the feedback, we have passed this on to GPD engineers to look into further.