
GPD Pocket 3 리뷰 – 인텔 펜티엄 골드 7505 CPU가 탑재된 새로운 2024년형 모델
GPD Pocket 3 검토 600.95
-
Battery Life
-
Display
-
Price to Performance
-
Keyboard
요약
Pros
- 컴팩트한 휴대성
- 다용도 2-in-1 미니 노트북 및 태블릿 디자인
- RS-2를 포함한 모듈형 포트
- 고해상도 8인치 터치스크린
- 32 및 KVM 옵션
- 크기 대비 우수한 성능
Cons
- 작은 키보드에 익숙해지는 데 시간이 걸릴 수 있습니다.
- 내장 SD 카드 슬롯 없음
- 대형 노트북에 비해 상대적으로 높은 가격
( review)
GPD Pocket 3 개봉하기
GPD Pocket 3 리뷰를 시작하기 전에 상자에 무엇이 들어 있는지 간단히 살펴보겠습니다. 상자 안에는 GPD Pocket 3 미니 노트북 본체와 영어와 중국어로 제공되는 사용 설명서가 들어 있습니다. 패키지에는 전원 공급 장치도 포함되어 있으며, 해당 국가에 맞는 어댑터를 제공해 드립니다. 마지막으로 USB Type-C 충전 케이블이 들어 있습니다.
GPD Pocket 3 개요
GPD Pocket 3 리뷰에 이어서 GPD Pocket 3 경량 노트북에 대해 자세히 살펴보겠습니다. 크기는 약 7.79 x 5.3 x 0.78인치(19.8 x 13.7 x 2.0cm)이고 무게는 725g(1.59파운드)입니다.
건메탈 컬러의 알루미늄 합금 케이스로 제작되어 무게는 조금 더 나가지만 내구성도 뛰어납니다. 인텔 펜티엄 골드 7505 프로세서와 같은 고급 부품이 탑재되어 있어 견고한 느낌을 주고 충격과 긁힘으로부터 보호해 줍니다.
뚜껑을 열면 1920×1200 해상도의 8인치 H-IPS 터치스크린 디스플레이가 나타납니다. 2-in-1 디자인으로 디스플레이를 비틀고 접으면 노트북을 태블릿으로 전환할 수 있어 다양한 용도로 활용할 수 있습니다. 반대로 돌리면 학생용 일반 노트북으로 다시 사용할 수 있습니다.
디스플레이에는 1600×1200 해상도의 2백만 화소 카메라와 내장 마이크가 포함되어 있어 고품질 화상 회의나 온라인 회의에 이상적입니다.
하단에는 왼쪽, 가운데, 오른쪽 마우스 버튼, 지문 스캐너가 내장된 전원 버튼, 최대 세 손가락 제스처를 지원하는 터치패드가 있습니다.
풀 쿼티 키보드는 백라이트가 있으며 켜거나 끌 수 있습니다. 키는 초콜릿 스타일의 로우 프로파일로 되어 있어 컴팩트한 크기에도 불구하고 편안하게 타이핑할 수 있습니다. 키의 느낌은 일반 키보드와 비슷하지만 손을 더 가까이 가져가야 합니다.
비즈니스용 노트북의 왼쪽에는 외부 디스플레이를 위한 USB Thunderbolt 4 포트와 HDMI 포트가 있으며, 오른쪽에는 USB 3.2 포트 2개와 3.5mm 헤드폰 잭이 있습니다. 뒷면에는 빠른 유선 연결을 위한 2.5Gbps 이더넷 포트가 있습니다. 특히 뒷면에는 모듈식 포트가 있어 GPD Pocket 3에 유연성을 더합니다. 기본적으로 USB 3.2 포트 모듈이 제공되지만 별도로 구매 가능한 다른 모듈로 교체할 수 있습니다.
RS-232 및 KVM 기능을 갖춘 모듈형 포트
다음 GPD Pocket 3 리뷰에서는 쇼의 주인공인 모듈형 포트에 대해 자세히 살펴봅니다. 모듈 교체는 나사 2개를 제거하고 모듈을 교체한 다음 다시 나사를 조이기만 하면 됩니다. 현재 RS-232 DB9 포트와 HDMI 및 USB 입력이 있는 단일 포트 KVM 모듈의 두 가지 모듈을 사용할 수 있습니다.
이 모듈은 디스플레이, 키보드, 마우스만 있으면 데이터 분석 또는 제어를 위한 하드웨어 수준의 액세스를 제공하는 산업용 애플리케이션에 특히 유용합니다. GPD Pocket 3에는 KVM 모듈을 지원하는 소프트웨어가 사전 설치되어 있습니다.
180° 회전 가능한 터치스크린 디스플레이
GPD Pocket 3 리뷰의 일환으로 2-in-1 미니 노트북과 태블릿 기능에 대해서도 자세히 살펴보겠습니다. 앞서 언급했듯이 GPD Pocket 3는 디스플레이를 살짝 돌리는 것만으로 소형 노트북에서 태블릿으로 변신할 수 있습니다. 일반적인 태블릿보다 두껍지만 견고한 디자인으로 안정감 있는 그립감을 제공합니다.
이 디바이스는 MPP2 프로토콜을 사용하여 GPD 스타일러스 및 Surface 펜과 완벽하게 호환됩니다. 따라서 예술적 재능은 없지만 메모를 작성하거나 그림을 그리는 데 탁월합니다!
기술 사양
업그레이드된 버전인 GPD Pocket 3는 특히 CPU에서 몇 가지 개선 사항을 자랑합니다. 다음은 주요 사양과 함께 배터리 수명, 팬 소음 및 온도 테스트 결과( GPD Pocket 3 리뷰)입니다.
- 디스플레이: 8인치 H-IPS, 1920×1200 해상도의 10포인트 터치 컨트롤, 284 PPI, 4096단계의 압력 감도를 지원하는 액티브 스타일러스 지원.
- CPU: 인텔 펜티엄® 골드 7505, 2코어, 4스레드, 최대 3.5GHz, 25W TDP.
- GPU: 11세대 인텔 UHD 그래픽, 최대 1250MHz, 48 EU.
- RAM: 16GB LPDDR4X 3733.
- 스토리지: 512GB M.2 2280 NVMe 1.3 PCIe Gen 3.0 x4.
- 통신: Wi-Fi 6E, Bluetooth 5.3, 2.5Gbps 이더넷.
- I/O: Thunderbolt 4, HDMI 2.0b, USB 3.2 Gen2 Type-A 2개, 3.5mm 헤드폰 포트, 초콜릿 스타일의 쿼티 백라이트 키보드, 지문 스캐너가 있는 전원 버튼, 3버튼 마우스 컨트롤이 있는 터치패드.
- 카메라: 200만 화소, 1600×1200 해상도, 마이크.
- 배터리: 38.5Wh, 7.7V==5000mAh×2 시리즈.
- 치수: 7.79 x 5.3 x 0.78인치(19.8 x 13.7 x 2.0cm).
- 무게: 725g(1.59파운드).
- 모듈: USB 3.2 Gen1 Type-A 1개(포함), RS-232 1개(별도 구매), KVM 제어 모듈 1개(별도 구매).
이 장치는 두 개의 5000mAh 충전식 배터리로 작동합니다. 테스트 결과, 사용량이 많은 시네벤치 벤치마크를 반복해서 실행한 결과 배터리는 2시간 10분 동안 지속되었습니다. 데스크톱에서 유휴 상태일 때는 약 11~12시간 동안 지속되었으며 평균 사용 시간은 5~6시간 사이였습니다.
팬 소음 및 온도 테스트의 경우, 시네벤치를 실행하는 동안 최대 팬 소음은 59dB, 최고 온도는 49°C로 비교적 조용하고 시원한 수준을 기록했습니다.
시스템 벤치마크
GPD Pocket 3 리뷰의 일환으로 다른 유사한 울트라 포터블 노트북과 벤치마킹하고 결과를 비교합니다.
PCMark
PCMark 테스트에서 GPD Pocket 3는 이전 인텔 펜티엄 실버 N6000 모델을 훨씬 능가하고 심지어 원 넷북 A1 프로를 능가하는 인상적인 결과를 보여주었습니다. 하지만 더 강력하고 비싼 인텔 코어 i7 모델에 비해서는 뒤처집니다.
노트북의 크기가 작아 노트 필기나 대용량 문서 작업과 같은 작업을 쉽게 처리할 수 있어 학생에게 이상적입니다. 또한 집이나 사무실에서 비즈니스용으로 사용하기에도 적합합니다.
시네벤치 R23
Cinebench R23 벤치마크에서 이전 모델인 N6000 및 A1 Pro에 비해 더 빠른 싱글 코어 및 멀티 코어 성능을 갖춘 GPD Pocket 3의 견고한 성능을 확인할 수 있었습니다. 인텔 코어 i7-1195G7의 성능에는 미치지 못하지만 인텔 펜티엄 골드 7505 프로세서는 강력한 대안을 제공합니다.
3DMARK
이 울트라 포터블 노트북은 게임용으로 제작되지는 않았지만 통합 GPU가 미디어 디코딩과 가벼운 이미지 및 동영상 편집을 처리할 수 있습니다. TimeSpy에서 GPD Pocket 3는 953점을 기록하여 펜티엄 실버 N6000 및 A1 Pro 모델을 크게 앞질렀습니다. 심지어 i7 버전에 근접한 점수는 주목할 만합니다.
듀얼 모니터 지원
USB-C 및 HDMI 포트를 활용하여 60Hz에서 최대 4K를 지원하는 외부 모니터 2대를 연결하거나 60Hz에서 최대 8K를 지원하는 USB-C를 통해 모니터 1대를 연결할 수 있습니다. DroiX PM14 4K 포터블 모니터와 함께 테스트한 결과, 두 대의 모니터를 함께 연결하면 환상적인 모습을 보여주었습니다.
썬더볼트 4 및 외장 그래픽 독 지원
USB 썬더볼트 4 포트를 사용하면 GPD Pocket 3을 GPD G1 eGPU 도킹 스테이션이나 ONEXPLAYER ONEXGPU와 같은 eGPU에 연결할 수 있습니다. 이렇게 하면 그래픽 성능이 크게 향상되어 이미지 및 비디오 편집, 렌더링과 같은 까다로운 작업을 수행하고 저사양 타이틀부터 고사양 타이틀까지 게임 환경을 개선할 수 있습니다.
G1 eGPU와 함께 사용했을 때, GPD Pocket 3는 iGPU에서 953점의 타임 스파이 점수를 획득한 반면 eGPU에서는 6,067점을 기록했습니다. 나이트 레이드 및 파이어 스트라이크와 같은 더 까다로운 벤치마크에서는 각각 18,129점 및 11,564점을 기록하여 원넷북 5와 비슷한 성능을 보였습니다. 이 eGPU 지원은 특히 배터리 수명이 중요하지 않은 경우 추가 성능이 필요한 사용자에게 보다 데스크톱과 유사한 경험을 제공합니다.
최종 생각
성능 면에서 인텔 펜티엄 골드 7505 프로세서는 이전 실버 N6000 모델에 비해 눈에 띄게 개선되었으며, 특히 GPU 성능에서 눈에 띄게 향상되었습니다. i7 경량 노트북에는 미치지 못하지만 가격대가 높기 때문에 고려할 가치가 있습니다.
집이나 사무실에서 일상적으로 사용하는 경우 GPD Pocket 3는 대용량 오피스 문서와 가벼운 이미지 편집을 쉽게 처리할 수 있습니다. 두 대의 모니터를 추가로 연결할 수 있는 옵션으로 활용도를 더욱 높일 수 있습니다. 더 많은 파워가 필요하다면 eGPU 옵션을 사용할 수 있습니다.
GPD Pocket 3의 진정한 강점은 산업용으로, 특히 RS-232 포트 옵션이 있어 전문가에게 탁월한 선택이 될 수 있다는 점입니다. 외부 솔루션이 있긴 하지만 불안정할 수 있고 하드웨어와 케이블이 추가되어 휴대해야 하는 번거로움이 있습니다. 이 기능이 내장되어 있으면 훨씬 더 편리합니다.
기기의 휴대성은 또 다른 주요 장점입니다. 8인치 터치스크린은 작아 보일 수 있지만 휴대성과 사용성 사이에서 훌륭한 균형을 이룹니다. 재킷 주머니나 작은 가방에 넣을 수 있을 정도로 작고 미니 노트북이나 태블릿 모드에서 한 손으로 쉽게 들고 다닐 수 있습니다.
전반적으로, 저는 GPD Pocket 3에 대해 불만스러운 점을 거의 발견하지 못했습니다. 몇 년 동안 인기 있는 울트라 포터블 노트북으로 집, 사무실 또는 이동 중에도 일상적인 사용에 필요한 모든 것을 갖추고 있습니다. 안정적이고 빠르며 다재다능한 2-in-1 미니 노트북과 태블릿을 찾고 있다면 이 제품을 적극 추천합니다.
Really bad customer service for a mediocre mini PC. No help yet you get 5% off on your next purchase. never again will I deal with GPD.
Vikram,
The package was not on hold, it was requested by me to be held at a FEDEX station to be picked up, instead of delivery. Because it needed a signature, and I was not going to be there at that location I made that request.
But FEDEX made an error and delivered it anyway and someone else signed for it So thank you for nothing. I took care of everything yesterday by keeping in touch with FEDEX. I should get the KVM module for free for compensation
for doing your work. I can’t believe how bad communication is with your company. Fedex had a delivery date set and because you guys did not give me a tracking number on time, I did not see the tracking information until 4/4/25.
I was also informed on my Fedex delivery management site that a signature was required to receive the package. If I had known this earlier, I would have prepared for it. Because I thought I missed the first delivery, Fedex should attempt to try again the next day.
I was not going to be in the office. So, I requested to have the package held at a Fedex facility down the street to be picked up, since that option was made possible. I did not request them to put a hold on the delivery, why would I do that?
I got confirmation that they will hold my package at that location. Then The tracking stopped. I found out the package did not leave San Francisco. And all this time I had no help from you. What a terrible experience your customer service provided.
I’ve seen the correction on my Track your order page. Not helpful at all. It’s like telling your customers to go track your package yourself. Re-name it to “shipping info” instead since you don’t provide tracking services. If you don’t understand the problem I will break it down:
No tracking number or information provided.
The tracking info mentioned date of arrival, yet it was held at customs after that date.
Customer was not aware of delayed shipment and requested to pick up at Fedex.
GPD track your order site was worthless.
Jack Li’s 1 reply to all my messages.
No response from Jack or the Logistic Team on checking my package issues.
Your contact us site does not mention that each message sent creates a trouble ticket. That is your problem not the customers.
Jack Li was answering my messages on a weekend so why didn’t he help me? Why did I have to wait till Monday when No one was there to respond to me anyway?
I never got a response till Wed. WEDNESDAY!!! I am lucky I am experienced with warehouse duties and delivery services for a Japanese company.
GPD should learn from the Japanese on customer service.
You need to show more appreciation to your paying customers and compensate them with a free KVM module for the trouble you caused.
Thank you for your detailed message. We truly regret the inconvenience and frustration you’ve experienced and appreciate you taking the time to share your feedback.
We have thoroughly reviewed the communication history and timeline of events relating to your order. Your package was shipped on March 31st via FedEx, and you first contacted us on April 5th requesting an update. According to the tracking records, a hold for pickup was placed on April 4th, and on April 6th, you informed us that FedEx was investigating the whereabouts of the parcel, requiring shipper cooperation. We understand your concern that you had to request tracking details manually — this is certainly not the level of service we aim to provide.
We sincerely apologize that you did not receive the tracking information after your order was processed. We’ve identified and resolved the issue that caused this. Please note that we have fail safe systems in place where even if our system does not send an email with your tracking number, FedEx’s system will send an email once the label is created. We would recommend also checking your spam/junk folder if this email was missed, as unfortunately we cannot control FedEx’s emailing system.
Our team responded on April 6th to your support request, advising that we had raised the issue with our logistics team and would follow up by Monday, April 7th. We also noted that sending multiple emails in a short period may push newer messages further down our queue due to how our ticketing system is structured. That said, we had already initiated an investigation with FedEx after receiving your first email and were awaiting their response — which, as mentioned in our reply on April 9th, can take time due to the need to check at local facilities before determining next steps.
As you noted in your follow-up on April 10th, the parcel resumed movement after being released from customs and you already spoke with FedEx about it. Based on the tracking updates, it was available at a local FedEx facility following your hold request.
To clarify: once a customer initiates a hold request directly with the carrier, any resulting delay or delivery issue falls outside our control. We understand how frustrating this experience was, especially considering the signature requirement and timing concerns at your work address.
In light of your request for a complimentary KVM module and stylus as compensation, we regret to inform you that this could not be approved. However, as a gesture of goodwill and appreciation for your patience, we offered a 5% discount on your next order, which you declined.
While we cannot offer complimentary items, we are happy to assist you in filing a delayed delivery claim — although in this case, FedEx confirmed that the delivery was delayed due to a customer-initiated hold, which disqualifies it from that process.
As of now, your parcel is confirmed to be held at a FedEx facility. We recommend collecting it at your earliest convenience to avoid any storage charges that FedEx may impose. If you do not wish to accept the delivery, we can initiate a return and refund in accordance with our website’s terms and conditions. Please note that any refund would be subject to a restocking fee of up to 10%, and any taxes or duties paid would not be refundable.
Once again, we truly apologize for the inconvenience and communication gaps you’ve experienced. Your feedback has been shared internally for improvement, and we’re committed to doing better in the future. Please let us know how you would like to proceed or if there is anything further we can assist with.